Blog
How to Go From Schematic to PCB in KiCad: Layout, Checks and Files
Learn how to go from schematic to PCB in KiCad with footprint checks, board outline setup, routing, DRC, Gerber export and DFM review.
Blog
How to Tell if PCB Is Damaged: Signs, Tests and Repair Checks
Learn how to tell if PCB is damaged by checking burn marks, broken traces, lifted pads, shorts, power rails, hot parts and repair or remake decisions.
Blog
How Does a PCB Work? Traces, Layers and Testing Checks
Learn how a PCB works through copper traces, layers, power paths, components, vias, ground planes, test points and manufacturing checks.
Blog
PCB Manufacturing Guides
This PCB guide center collects practical articles about PCB design, fabrication, soldering, testing, supplier selection and manufacturing checks. Use it as a starting point when you need to prepare files, compare production options, inspect a board problem, or talk with a PCB supplier. Manufacturing and supplier selection pcb china manufacturer Read more
Blog
How to Manufacture PCB Board: Gerber, Drilling and DFM Checks
Learn how to manufacture PCB board from Gerber files through imaging, drilling, plating, solder mask, silkscreen, surface finish, inspection, and DFM checks.
Blog
How to Print Silkscreen on PCB: Legend, Clearance and DFM Checks
Learn how to print silkscreen on PCB with legend layers, pad clearance, useful markings, manufacturing limits, readability checks, and DFM review.
Blog
How to Protect PCB from Moisture: Coating, Storage and DFM Checks
Learn how to protect PCB from moisture with design spacing, conformal coating, masking, cleaning, storage, inspection, and DFM review.
Blog
How to Read PCB Layout: Layers, Traces and DFM Checks
Learn how to read PCB layout files by checking board outline, layers, components, traces, vias, drill files, silkscreen, and DFM issues before fabrication.
Blog
How to Measure PCB Trace Impedance: TDR, Coupons and DFM Checks
Learn how to measure PCB trace impedance with TDR, test coupons, stackup data, tolerance checks, and controlled impedance DFM review.
Blog
How to Make Vias on PCB: Drilling, Plating and DFM Checks
Learn how to make vias on PCB with drilling, copper plating, via types, annular ring checks, aspect ratio limits, and DFM notes before fabrication.